Modular, full capability EMC test systems for surge, fast transients and power quality. Includes Windows software and virtual front panel operation, AC Mains current monitoring, data logging and is easily switched to apply different types of pulses to the equipment under test. All ECAT systems with two or more modules are discounted 20% from individual module prices.

RF Inductor, SMT RF Inductor, QPL, Toroidal, Pot Cores, Transformers, Tunable Coil, Magnetic, Non-Magnetic

Thermo Keytek ECAT Systems

These are a few of the most popular ECAT configurations. They can be modified by exchanging or adding the modules listed below.

Part #	Description	Modules Included	Testing Standard
E1000-4-4	Fast transient generator to 4.4kV with coupler	E103, E412	IEC 61000-4-4 EN 50082
E1000-4-5-3	Combination wave surge to 6.6kv with 3 Phase coupler	E103, E501, E4554	IEC 61000-4-5 ANSI/IEEE C62.41
E1089	Bellcore 2x10, 10x360 and 10x1000 telecom surge generator	E103, E506-4W E509,E508	GR-1089-core

Series 500 Surge Modules

These plug-ins to the E103 ECAT Controller generate the waveforms defined below. The first number (1.2) is the rise-time, the second(50) is the fall-time, both in microseconds. Current is given when defined by the standard.

Part #	Description	Waveform V/I	Testing Standard
E501	Combination wave 2&12 ohm	V=1.2x50 to 6600v I=8x20 to 3300a	IEC 61000-4-5, ANSI/IEEE C62.41
E502	Telecom wave	V=10x700 or .5x700 to 6000v	FCC part 68 CCITT K.17
E503	100kHz Ring wave	I=200 or 500 V to 6600v	IEC 61000-4-12 ANSI/IEEE C62.41
E506-4w	Bellcore lightening surge	2x10 to 5000v, 500a	GR-1089-core
E508	Bellcore lightening surge	V=10x360 to 1000v, 100a	GR-1089-core
E509	Bellcore lightening surge	10x1000 to 1500v, 100a	GR-1089-core
E510	Combination wave 2&12ohm	V=1.2x50 to 10kv I=8x20 to 5ka	UL864
E513	Voltage ramp surge	100v/microsecs, 500v/microsecs, 1kv/microsecs, 5kv/microsecs, 10kv/microsecs to 3000v	UL864

Series 400 Surge Modules

These plug-ins for the E103 Controller generate EFT pulse bursts of 5ms/50ns to meet national and international standards, including IEC 1000-4-4. Some include coupler/filters.

Part #	Description	Coupler/Filter	Max Voltage
E411	EFT generator, 50 ohm output imped.	not included	4.4kV
E412	EFT generator, 50 ohm output imped.	250v/16a single phase	4.4kV
E421	EFT generator, 50 ohm output imped.	not included	8kV
E424	EFT generator, 50 ohm output imped.	480v/32a three phase	4.4kV

Coupler/Filter Modules

These modules are required to couple the surge onto the power line. The E551 can be used only with Series 500 modules; the rest with both surge and EFT modules. All include built-in voltage and current monitors and coupling modes under complete software control.

Part #	Description	Max. EUT voltage/current
E551	Sure Coupler/Filter - single phase	250V/16A
E4552	E4552 plus HV option	480V/32A
E4554	Surge and EFT coupler - three phase	480V/32A
E4554-HV	Surge and EFT coupler - three phase	600V/32A

Other Modules and Accessories

Part #	Description
103	Controller for ECAT system with front panel and software operation
EP62	Plug-in provides swells, dips and interrupts (PQF) on power mains per IEC 1000-4-11
CCL-4/s	Capactive coupling clamp for testing I/O and data lines per IEC 1000-4-11