Lionheart Northwest RF Microwave Equipment, EMC Test Equipment RF/Microwave, EMC and
Test & Measurement Solutions
for the Pacific Northwest
Phone
Fax
Email
(425) 882-2587
(425) 952-8739
sales@lionheartnw.com
Frequency & Phase Analysis

The A7-MX is invaluable in the design of low noise oscillators, atomic frequency standards and passive devices where close in phase noise, freedom from spurii, and phase stability are essential design objectives.

The A7-MX is unique in its ability to measure time domain stability at averaging times from 1ms to weeks, and phase noise from mHz to 500Hz. Discrete spurii can be measured close to the carrier at levels down to -120dBc.

The high resolution input operates at 5 or 10MHz. The reference is also at 5 or 10MHz.

A lower resolution input is provided which will measure at frequencies between 50kHz and 65MHz.

The A7-MX is not limited to research and development. The real time digital display of fractional frequency offset combined with the high resolution analogue meter makes the production setting of all types of frequency standard a simple and rapid operation.

Quartzlock A7-MX Freqency Analysis, Phase Analysis, software
Quartzlock A7-MX Freqency Analysis, Phase Analysis, software

A7-MX Frequency & Phase Analysis

Thee A6-CPS digital phase locked loop (PLL) can be customised to a specific application and shipped ready for use in production.

To facilitate integration with your systems the A6-CPS can be shipped for customer configuration of adjustable parameters using the RS232 interface. When configuration is perfected, the parameters can be fixed in production by Quartzlock prior to shipping quantity requirements.

The A6-CPS digital PLL may be fitted into the Quartzlock A6 frequency convertor with BVA OCXO, rubidium, GPS or other options.

The customer has a choice of OCXO’s to fit onto or outside the A6-CPS digital PLL pcb. A customer specified A6-CPS Digital PLL may be smaller than the PCB pictured and fitted inside an OCXO sealed case.








Standard Specification:

   

Options

 
Output Frequency 10 MHz   Please see the datasheet for specifications on the following options
Number of Outputs 1  
Phase Noise 1Hz 110 dBc   Option 01 - Distribution Card 1 Input 4 Outputs
Phase Noise 10Hz 160 dBc   Option 16 - Add LPRO Rubidium Oscillator
PSU Nominal 24V   Option 17 - Add QL10 FRS High Performance Rubidium Oscillator
PSU Min 14V   Option 18 - Add Additional 1 to 5 Years Warranty (18.1 = 1 Year...18.5 = 5 Years)
PSU Max 30V   Option 32 - Stable 32 Analysis Software
Current 150mA   Option 36 - Training
Supply DC   Option 37 - 0.2MHz to 1000MHz Power Splitter