Lionheart Northwest RF Microwave Equipment, EMC Test Equipment RF/Microwave, EMC and
Test & Measurement Solutions
for the Pacific Northwest
 Phone
Fax
Email		 (425) 882-2587
(425) 952-8739
sales@lionheartnw.com
Skip Navigation LinksHome > RF/Microwave > Quartzlock > Frequency Converters
Questions or special requirements?
Please do not hesitate to contact us.
Quartzlock
Rubidium Frequency Reference
GPS Controlled Frequency Reference
Passive & Active Hydrogen Maser
Timing Modules
Frequency and Phase Analysis
Distribution Amplifiers
Frequency Conversion
Redundancy Switches
RF & Microwave Components
Custom Applications
Frequency Converters

A comprehensive range of frequency convertors to meet a wide range of needs.

 Quartzlock Frequency Converters
Quartzllock A6000 100kHz to 10MHz frequency converter

A6000

The Quartzlock A6000 is a frequency converter for use with frequency standards such as rubidium, cesium, or hydrogen maser standards. Sine wave outputs are provided at frequencies of 10 MHz. 1U rack mount 100kHz to 10 MHz frequency conversion.

Inputs

The primary input is a sine wave at 100 kHz from the frequency standard. This should be at a level between +5 dBm and +15 dBm. The input impedance of the A6000 is 50 ohms.

Outputs

The 6 x 10 MHz outputs are obtained from 3 channels of a 4-way distribution amplifier. The output levels will follow the input levels, as the distribution amplifier is a wide band linear amplifier.

Standard Specification:

        
Output Frequency 10 MHz    
Number of Outputs 6    
Quartzlock A6000-E1 100kHz sine wave output 2048kHz

A6000-E1

The Quartzlock A6000-E1 is a 1U rack mount, frequency converter for use with frequency standards such as rubidium, cesium, or hydrogen maser standards. Sine wave outputs are provided at frequencies of 2,048 kHz.

Inputs

The primary input is a sine wave at 100 kHz from the frequency standard. This should be at a level between +5 dBm and +15 dBm. The input impedance of the A6000 is 50W.

Outputs

The 6 x 10 MHz outputs are obtained from 3 channels of a 4-way distribution amplifier. The output levels will follow the input levels, as the distribution amplifier is a wide band linear amplifier.

Standard Specification:

        
Output Frequency 10 MHz    
Number of Outputs 6    
Quartzlock A6 Metrology Frequency Converter 5MHz or 10MHz sine wave

A6 Metrology Performance Frequency Converter

The Quartzlock model A6 frequency converter precisely changes either 5 or 10MHz sine wave signals to a number of other frequencies from 1Hz and 1pps upwards to other standard frequencies.


Features

  • A5 Design Criteria for Stability and Low Noise
  • All Outputs Synchronized
  • A5 4 Output OEM Modules Provide Mulitple Outputs of Input Frequency
  • 24V DC or 90 to 240V AC Operation
  • 1 Hz / 1PPS Sync Input

Application

  • National standards laboratories
  • Calibration laboratories
  • Standards laboratories
  • Observatories
  • Research
  • Production test and development

Benefits

  • Hydrogen Maser 5MHz output conversion to 100kHz, 1 MHz, 10MHz & 2048kHz
  • Telecoms Outputs
  • Rubidium, GPS, OAS, quartz or tracking RX 10Mhz outputs converted to 1Hz, 1PPS, 0.1MHz & 5MHz (2048kHz option)
  • Input signal characteristics closely monitored

Standard Specification:

    

Options:

 
Output Frequency 10MHz, 5 MHz, 1MHz, 100kHz   Please see the datasheet for specifications on the following options
Output Level 13 dBm    
Number of Outputs 14   Option 00 - Seamless Battery Back-up Switch
Harmonics dBc <40 dBc   Option 01 - Distribution Card 1 Input 4 Outputs
Spurious dBc <75 dB   Option 02 - E1 Output 1544kHz
PSU Nominal 240V   Option 03 - T1 Output 1544kHz
PSU Min 220V   Option 04 - 13MHz Output
PSU Max 240V   Option 06 - 1 PPS Output
Supply AC   Option 07 - 10.24MHz Output
      Option 18 - Add Additional 1 to 5 Years Warranty (18.1 = 1 Year..18.5 = 5 Years)