 |
|
 |
|
|
|
|
|
Thermo
KeyTek EMC Pro Pluss
Data Sheet |
An efficient, easy-to-use EMC immunity test
system, the KeyTek EMCPro Plus answers
industry demand for a mid-range compliance-level system, and fully
addresses new requirements for a 100khz burst rate per IEC 61000-4-4,
Edition 2 (EFT) and 80% clipper
IEC 61000-4-11, Edition 2 (PQF).
Test capabilities for EMC Directives PLUS: ANSI/IEEE, CCITT, ETSI, UL, &
others
Can be configured with up to seven test capabilities
Combination & ring wave surge test to 6kV
Many options: mains & I/O coupler/decouplers, magnetic field monitors,
coils, etc. |
|
IEC Standard Test |
Voltage Levels |
|
IEC 61000-4-2 ESD |
8.8kV air; 4.4kV contact |
|
IEC 61000-4-4 EFT |
4.4kV |
|
IEC 61000-4-5; ANSI C62.41 Surge |
1.2us, 8/20us |
|
Combination Wave Category B |
6kV |
|
IEC 61000-4-5 Surge 10/700ms
Telecom Wave |
6.6kV |
|
IEC 61000-4-8 Power Frequency Magnetic Fields |
30 A/m |
|
IEC 61000-4-9 Pulse Magnetic Fields |
1000 A/m |
|
IEC 61000-4-11 Dips and Interrupts |
70%, 40%, 0% short and open |
|
ANSI C62.41 Surge Ring Wave Category A, B |
6.6kV |
|
CCITT Rec. K.17, K.20, K.21 Surge 10/700ms Wave |
6.6kV |
|
UL1449 Surge Combination Waves |
3kA |
|
FCC Part 68 Telecom 9/720ms
waveform |
1kV only |
|
| |
|
|
he KeyTek MiniZapฎ
ESD simulator meets mandatory requirements for company-wide ESD
test programs:
High performance in a rugged hand-held unit for the manufacturing floor
and the field as well as the lab
Safely & easily generates reliable real world, repeatable & correlatable
ESD simulation pulses
Direct contact mode & air discharge testing, plus coupling planes for
indirect ESD tests |
 |
Thermo KeyTek Minizap ESD Simulator
Data Sheet |
| |
|
|
|
KeyTek Series 2000 ESD Simulator
Industry recognized 0 to 25kV ESD simulator that can be
hand-held or tripod-mounted.
Library of interchangeable discharge networks, current injection adapters
& tips plug into discharge barrel
Programmable repetitive operating modes, in addition to single-shot
Easy, interchangeable ESD waveforms for testing to multiple standards
Data Sheet |
 KeyTek
Series 2000 ESD Simulator |
| |
|
|
|
Thermo
KeyTek ECAT
|
The KeyTek ECAT
provides powerful expert computer-aided testing for all your Pulsed EMI test
requirements. Modular, totally integrated, full capability test systems &
instruments for ESD, EFT, Surge and Power Quality Failure. Enables
manufacturers & designers of electronics (including telecom) to easily &
rapidly test for pulsed EMI threats:
Pre-compliance
Production sampling
Compliance
Data Sheet |
The ECAT meets the test levels and requirements in accordance
with national and international standards, including:
- IEC 61000-4-4
- IEC 61000-4-5
- IEC 61000-4-11
- ANSI/IEEE C62.41
- UL 864
- UL 1449
- FCC Part 68
- CCITT Rec. K.17, K.20, K.21
- Bellcore-1089-CORE
- British Telecom Standards
|
| |
|
|
Available ECAT Test Modules and Capabilities |
EFT
- EFT burst testing to 8kV Model
E421
- EFT burst testing to 4.4kV
Model 411
- EFT burst testing to 4.4kV with built-in single-phase AC
mains coupler/decoupler in accordance with IEC 61000-4-4
Model E412
- EFT burst testing to 8kV with built-in single-phase AC
mains coupler/decoupler in accordance with IEC 61000-4-4
Model E422
- EFT burst testing to 4.4kV with built-in three-phase AC
mains coupler/decoupler in accordance with IEC 61000-4-4
Model E423
- EFT burst testing to 8kV with built-in three-phase AC mains
coupler/decoupler in accordance with IEC 61000-4-4
Model E434
|
SURGE
- IEC 61000-4-5, ANSI/IEEE C62.41 Cat. B and UL 1449 at 3kA
Model E501B
- Telecom surge waves per IEC 61000-4-5, FCC Part 68 and
CCITT Rec. K.17, K.20 and K.21
Model E502B
- Ring waves specified by ANSI/IEEE C62.41 Cat A and B and
various UL standards including UL 864
Model E503
- Combination waves per UL 1449
Model E504A
- Lightning surge waveforms required by FCC Part 68 Telecom
Model E505
- Three-terminal 2/10us telecom
waves per Bellcore GR-1089-CORE
Model E506
- Up to five-wire (four-terminal) testing with 2/10us
telecom waves required by Bellcore GR-1089-CORE
Model E506-4W
- 10/360us telecom surge wave
required by Bellcore GR-1089-CORE
Model E508 & E508-12P
- Telecom True three-terminal testing using 10/1000us
voltage and current waves as required by Bellcore GR-1089-CORE
Model E509A
- Extended range combination wave specified by ANSI/IEEE
C62.41 Cat B and IEC 61000-4-5 to 10kV and 5kA
Model E510A
- High current combination waves to 6kV and 5kA as required
by British Telecom standards
Model E511
- Voltage ramps for testing surge protection components, such
as gas arresters, as required by UL 864
Model E513
- Two terminal voltage ramps and 10/1000us
current waves for testing telecom equipment and protectors, including gas
discharge tubes and silicon avalanche devices, as required by some Bellcore
and component standards
Model E514
- High voltage, Category C high exposure, high-current
combination waves required by ANSI C62.41 standards for service entrance and
outside connected electronics, while meeting the requirements of IEC 61000-4-5
for all exposure categories
Models E521 and E522
- Single phase, AC line coupler/decoupler for surge waves per
IEC 61000-4-5 for
power lines
Model E551
- High energy 10/250us telecom
waves required by Bellcore GR-1089-CORE
Model E515
- I/O line coupler/decoupler per IEC 61000-4-5
Model CM-I/OCD
- Telecom line coupler/decoupler per IEC 61000-4-5
Model CM-TELCD
|
|
Combination
- Single and three-phase ac line coupler/decouplers for EFT
and Surge waves per IEC 61000-4-4 and IEC 61000-4-5
Model E455x
|
Dips and Interrupts
- One phase of a three-phase, five-wire ac power mains for
swell, dip and interrupt testing per IEC 61000-4-11 and other standards
Model EP3
-
Swells, dips and interrupts on ac power mains in compliance
with and exceeding the requirements of IEC 61000-4-11
Model EP61 and EP62
|
|
EMC Test Options &
Accessories |
 |
