Lionheart Northwest RF Microwave Equipment, EMC Test Equipment RF/Microwave, EMC and
Test & Measurement Solutions
for the Pacific Northwest
 Phone
Fax
Email		 (425) 882-2587
(425) 952-8739
sales@lionheartnw.com
Skip Navigation LinksHome > RF Cables > Connector Interfaces
Questions or special requirements?
Please do not hesitate to contact us.
Cable Assemblies
Cables (TRU)
Connector Interfaces (TRU)
Quick Disconnects (TRU)
Precision Adapters (TRU)
Multi Port (TRU)
eP Formables (evissaP)
eP Flexibles (evissaP)
eP Semi Rigid (evissaP)
eP Test Grade (evissaP)
Connector Interfaces from TRU

TRU's interconnect capabilities feature a wide range of interfaces to meet the most challenging requirements of nearly every military, semiconductor, test and instrument, wireless, medical and industrial application.

 High Precision Cables, Connector Interfaces, Military Grade Cables, Medical Cables, Test Cables
Connector Interfaces

Interface Features
  • MIL-STD-202 electro-mechanical-environmental performance
  • MIL-STD-348 and proprietary Quick-Disconnect interfaces
  • Broadband Frequency performance to 50 GHz
  • Optimized material / finishes for high power / voltage
  • Unique axial / radial captivated designs
  • Critical safety interlock designs
  • Fully integrated / matched cable-connector junctions
  • Wide range of material and plating finishes available
  • Configuration options
  • Bulhead / Panel Mount / Right Angle
  • Polarized / Receptacle / Replaceable Front Ends
Interface Sheets
EIA 1-5/8 MEIAtm-1625 EIA 7/8 SQStm QRMtm QDS 7-16 LC
LT C HN SC C N ATNC TNC
BNC SMA BMA BMMA 3.5 mm 2.9 mm High Power  

EIA 1-5/8
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85F°to +329°F (-65°C to +165°C)
Frequency Range DC to 3 GHz   Vibration / Shock MIL-STD-202 Method 204 / Method 213
Voltage Range 5,100 volts rms   Moisture Resistance MIL-STD-202 Method 106
Dielectric Withstanding Voltage 10,400 volts rms   Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per EIA STD RS-225 and MIL-STD-24044   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Flange Mounting)   Contacts (Outer) Brass, Silver, or Nickle Plated
Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
MEIA 1-5/8
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85F°to +329°F (-65°C to +165°C)
Frequency Range DC to 3 GHz   Vibration / Shock MIL-STD-202 Method 204 / Method 213
Voltage Range 5,100 volts rms   Moisture Resistance MIL-STD-202 Method 106
Dielectric Withstanding Voltage 10,400 volts rms   Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per TRU Standards   Body Brass, Silver or Nickle Plated, Stainless Steel, Passive
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 165 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
EIA 7/8
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85F°to +329°F (-65°C to +165°C)
Frequency Range DC to 6 GHz   Vibration / Shock MIL-STD-202 Method 204 / Method 213
Voltage Range 2,800 volts rms   Moisture Resistance MIL-STD-202 Method 106
Dielectric Withstanding Voltage 5,800 volts rms   Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per EIA STD RS-225 and MIL-DTL-24044   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Flange Mount)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
MEIA 7/8
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85F°to +329°F (-65°C to +165°C)
Frequency Range DC to 6 GHz   Vibration / Shock MIL-STD-202 Method 204 / Method 213
Voltage Range 2,800 volts rms   Moisture Resistance MIL-STD-202 Method 106
Dielectric Withstanding Voltage 5,800 volts rms   Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per TRU Standards   Body Brass, Silver or Nickle Plated, Stainless Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 70 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
SQS Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85F°to +329°F (-65°C to +165°C)
Frequency Range DC to 500 MHz   Vibration Shock MIL-STD-202
Voltage Range 2,700 volts rms   Moisture Resistance Configurations Available
Dielectric Withstanding Voltage 10,000 volts rms   Corrosion (salt spray) Configurations Available

Mechanical Materials / Finishes
Mating Characteristics per TRU standards   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver, or Gold Plated
Recommended Torque N/A (Quick-disconnect Push-on)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
QRM Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85F°to +329°F (-65°C to +165°C)
Frequency Range DC to 1 GHz   Vibration Shock MIL-STD-202
Voltage Range 3,500 volts rms   Moisture Resistance Configurations Available
Dielectric Withstanding Voltage 8,000 volts rms   Corrosion (salt spray) Configurations Available

Mechanical Materials / Finishes
Mating Characteristics per TRU standards   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Quick-disconnect Push-on)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
QDS Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -67°to +390°F (-55°C to +199°C)
Frequency Range DC to 6 GHz   Vibration Shock MIL-STD-202
Voltage Range 1,000 volts rms   Moisture Resistance Configurations Available
Dielectric Withstanding Voltage 3,000 volts rms   Corrosion (salt spray) Configurations Available

Mechanical Materials / Finishes
Mating Characteristics per TRU standards   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Quick-disconnect Push-on)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
7-16 Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -67°to +390°F (-55°C to +199°C)
Frequency Range DC to 7 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 2,700 volts rms   Shock MIL-STD-202 Method 213
Dielectric Withstanding Voltage 4,000 volts rms   Moisture Resistance MIL-STD-202 Method 106
Intermodulation -155 dBc Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per IEC 169-4 or DIN 47223 as applicable   Body Brass, Silver or Nickle Plated or Trulustretm
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Quick-disconnect Push-on)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
LC Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 1 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 3,000 volts rms   Shock MIL-STD-202 Method 213
Dielectric Withstanding Voltage 5,000 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-C-3650 or MIL-STD-348   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 75 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon, Rexolite, Polyethelene
      Gaskets & Seals Silicone Rubber
LT Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 1 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 5,000 volts rms   Shock MIL-STD-202 Method 213
Dielectric Withstanding Voltage 4,000 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-C-3650 or MIL-STD-348   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 75 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
QC Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 7 GHz   Vibration MIL-STD-202
Voltage Range 2,700 volts rms   Shock MIL-STD-202
Dielectric Withstanding Voltage 4,000 volts rms   Moisture Resistance Configurations available
    Corrosion (salt spray) Configurations available

Mechanical Materials / Finishes
Mating Characteristics per TRU Standards   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Flange Mounting)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals N/A
HN Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 4 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 1,500 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 5,000 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-C-3643   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 24 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators PTFE or Rexolite
      Gaskets & Seals Silicone Rubber
SC Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 11 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 1,000 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 3,000 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-STD-348   Body Brass, Silver or Nickle Plated, Stainless Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 23 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon, Fluoroloy H
      Gaskets & Seals Silicone Rubber
C Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 11 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 1,000 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 3,000 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-STD-348   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Bayonet Coupling)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
N Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 18 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 1,000 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 2,500 volts rms   Moisture Resistance MIL-STD-202 Method 106
Intermodulation -155 dBc Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-STD-348   Body Brass, Silver or Nickle Plated, Stainles Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 23 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
ATNC Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 18 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 500 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 1,500 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-STD-348   Body Brass, Silver or Nickle Plated, Stainles Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 23 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
TNC Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 16 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 500 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 1,500 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-STD-348   Body Brass, Silver or Nickle Plated, Stainles Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 23 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
BNC Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 4 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 500 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 1,500 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-STD-348   Body Brass, Silver or Nickle Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Bayonet Coupling)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
SMA Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 26 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 500 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 1,500 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-STD-348   Body Brass, Silver or Nickle Plated, Stainless Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 9 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
BMA Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +329°F (-65°C to +165°C)
Frequency Range DC to 18 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 335 volts rms   Shock MIL-STD-202 Method 210
Dielectric Withstanding Voltage 1,000 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per MIL-STD-348   Body Brass, Silver or Nickle Plated, Stainless Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Push-on Blind-mate)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
BMMA Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +257°F (-65°C to +125°C)
Frequency Range DC to 28 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 335 volts rms   Shock MIL-STD-202 Method 213
Dielectric Withstanding Voltage 675 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per TRU Standards   Body Brass, Silver or Nickle Plated, Stainless Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque N/A (Push-on Blind-mate)   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
3.5 mm Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -67°to +221°F (-55°C to +105°C)
Frequency Range DC to 36 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 250 volts rms   Shock MIL-STD-202 Method 213
Dielectric Withstanding Voltage 750 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per IEC STD 169-23   Body Brass, Silver or Nickle Plated, Stainless Steel, Passivate
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Silver or Gold Plated. Male: Brass, Silver or Gold Plated
Recommended Torque 9 in-lbs nominal   Contacts (Outer) Brass, Silver, or Nickle Plated
  Contacts (Slotted) Beryllium Copper, Silver or Nickle Plated
      Insulators Teflon
      Gaskets & Seals Silicone Rubber
2.9 mm Interface
Datasheet
Electrical Enviromental
Nominal Impedance 50 ohms Temperature Range -85°to +194°F (-65°C to +90°C)
Frequency Range DC to 46 GHz   Vibration MIL-STD-202 Method 204
Voltage Range 250 volts rms   Shock MIL-STD-202 Method 213
Dielectric Withstanding Voltage 750 volts rms   Moisture Resistance MIL-STD-202 Method 106
    Corrosion (salt spray) MIL-STD-202 Method 101

Mechanical Materials / Finishes
Mating Characteristics per IEC STD 169-23   Body Stainless Steel, Passivate, or Gold Plated
Connector Durability 500 cycles min.   Contacts (Inner) Female: Beryllium Copper, Gold Plated. Male: Brass, Gold Plated
Recommended Torque 9 in-lbs nominal   Contacts (Outer) Stainless Steel, Passivate or Gold Plated
  Insulators Noryl PPO EN265
      Gaskets & Seals Silicone Rubber